What are the tools available for performing 300-135 dumps? Troubleshooting and Maintaining Cisco IP Networks (TSHOOT 300-135) is a qualifying exam for the CCNP Routing and Switching certifications. The CCNP Routing and Switching exam 300-135 dumps vce exam certifies the switching knowledge and skills of successful candidates. They are certified in de that use exam team Troubleshooting and Maintaining Cisco IP Networks course. After taking this course, you will be prepared for certification exam, which is taken at exam testing center. The user must complete Cisco CCNP Routing and Switching prior to taking this 300-135 dumps course. Users will receive certificate of completion upon passing the course with an 80% or better.
Exam Code: 300-135
Exam Name: Troubleshooting and Maintaining Cisco IP Networks
exam 300-135 Dumps Related Exams
- 300-135 Troubleshooting and Maintaining Cisco IP Networks
exam 300-135 Dumps Related Certifications
- Wireless LAN
- Wireless BYOD Specialist
- VPN and Security
- Unified Communications
- Substation Automation
- TelePresence Video
- Storage Networking
The Troubleshooting and Maintaining Cisco IP Networks (300-135 TSHOOT) version is a 2-hour test with 15-25 questions questions that validate professionals who have the expertise to plan and perform regular maintenance on complex enterprise routed and switched networks and use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.
exam LATEST AND MOST ACCURATE Cisco 300-135 DUMPS DUMPS EXAM Q&AS(1-18)
A network administrator is troubleshooting an EIGRP connection between RouterA, IP address 10.1.2.1, and RouterB, IP address 10.1.2.2. Given the debug output on RouterA, which two statements are true? (Choose two.)
A. RouterA received a hello packet with mismatched autonomous system numbers.
B. RouterA received a hello packet with mismatched hello timers.
C. RouterA received a hello packet with mismatched authentication parameters.
D. RouterA received a hello packet with mismatched metric-calculation mechanisms.
E. RouterA will form an adjacency with RouterB.
F. RouterA will not form an adjacency with RouterB.
300-135 exam Correct Answer: DF
Refer to the exhibit. How would you confirm on R1 that load balancing is actually occurring on the default- network (0.0.0.0)?
A. Use ping and the show ip route command to confirm the timers for each default network resets to 0.
B. Load balancing does not occur over default networks; the second route will only be used for failover.
C. Use an extended ping along with repeated show ip route commands to confirm the gateway of last resort address toggles back and forth.
D. Use the traceroute command to an address that is not explicitly in the routing table.
Correct Answer: D
When troubleshooting an EIGRP connectivity problem, you notice that two connected EIGRP routers are not becoming EIGRP neighbors. A ping between the two routers was successful. What is the next thing that should be checked?
A. Verify that the EIGRP hello and hold timers match exactly.
B. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP peer command.
C. Verify that EIGRP broadcast packets are not being dropped between the two routers with the show ip EIGRP traffic command.
D. Verify that EIGRP is enabled for the appropriate networks on the local and neighboring router.
300-135 dumps Correct Answer: D
Which IPsec mode will encrypt a GRE tunnel to provide multiprotocol support and reduced overhead?
B. multipoint GRE
Correct Answer: D
Which three features are benefits of using GRE tunnels in conjunction with IPsec for building site- to-site VPNs? (Choose three.)
A. allows dynamic routing over the tunnel
B. supports multi-protocol (non-IP) traffic over the tunnel
C. reduces IPsec headers overhead since tunnel mode is used
D. simplifies the ACL used in the crypto map
E. uses Virtual Tunnel Interface (VTI) to simplify the IPsec VPN configuration
300-135 pdf Correct Answer: ABD
Which statement is true about an IPsec/GRE tunnel?
A. The GRE tunnel source and destination addresses are specified within the IPsec transform set.
B. An IPsec/GRE tunnel must use IPsec tunnel mode.
C. GRE encapsulation occurs before the IPsec encryption process.
D. Crypto map ACL is not needed to match which traffic will be protected.
Correct Answer: C
You enabled CDP on two Cisco Routers which are connected to each other. The Line and Protocol status for the interfaces on both routers show as UP but the routers do not see each other a CDP neighbors. Which layer of the OSI model does the problem most likely exist?
300-135 vce Correct Answer: D
CDP is a protocol that runs over Layer 2 (the data link layer) on all Cisco routers, bridges, access servers, and switches. CDP allows network management applications to discover Cisco devices that are neighbors of already known devices, in particular, neighbors running lower-layer, transparent protocols. With CDP, network management applications can learn the device type and the SNMP agent address of neighboring devices. This feature enables applications to send SNMP
queries to neighboring devices. In this case, the line protocol is up which means that the physical layer is operational (layer 1) but the data link layer is not.
FCAPS is a network maintenance model defined by ISO. It stands for which of the following?
A. Fault Management
B. Action Management
C. Configuration Management
D. Protocol Management
E. Security Management
Correct Answer: ACE
Which three management categories are contained in the FCAPS network maintenance model? (Choose three.)
300-135 exam Correct Answer: ABD
What is the result of configuring the logging console warning command?
A. Messages with a severity level of 4 and higher will be logged to all available TTY lines.
B. Only warning messages will be logged on the console.
C. Warning, error, critical, and informational messages will be logged on the console.
D. Warning, critical, alert, and emergency messages will be logged on the console.
E. The logging console warning command needs to be followed in the configuration with logging buffered byte size to specify the message buffer size for the console.
Correct Answer: D
Refer to the shown below.
What statement is correct regarding the output shown in the graphic?
A. These two log messages will not have a severity level.
They are not errors but are just informational messages.
B. The first log message is categorized as a warning message.
C. These messages regarding interface status are normal output and will always be displayed when you exit config mode.
D. The first log message is an error message with a severity level of 3.
E. The second message would be shown if the logging console warning command had been issued.
300-135 dumps Correct Answer: D
Refer to the configuration statements shown in the graphic above.
R1(config)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
R1(config)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
R1#debug ip packet 199 detail
Which statement reflects what the effect is of this configuration sequence?
A. These commands will generate an error message because you cannot use an access list with any debug commands.
B. These commands will have no effect at all. The debug ip packet command will work as normal and display info for all IP packets.
C. These commands turn on debug ip packet only for packets between hosts 10.1.1.1 and 172.16.1.1.
D. These commands will only work when you specify only one host rather than two.
Correct Answer: C
What is the result if you configure two devices with the ntp server command?
A. Nothing will happen until one of the devices is configured with the prefer parameter.
B. The NTP protocol will determine which server is most reliable and will synchronize to that server.
C. The device with the highest priority will become the active server and the other device will become the backup server.
D. The device with the lowest MAC address will become the active server and the other device will become the backup server.
300-135 pdf Correct Answer: B
A technician is troubleshooting connectivity problems between two routers that are directly connected through a serial line. The technician notices that the serial line is up, but cannot see any neighbors displayed in the output of the show cdp
neighbors command. In which OSI layer is the problem most likely occurring?
B. data link
Correct Answer: B
What are two approaches to maintaining a network?(Choose two.)
C. bottoms up
300-135 exam Correct Answer: BD
Which two statements about the Cisco Aironet Desktop Utility (ADU) are true? (Select two)
A. The Aironet Desktop Utility (ADU) profile manager feature can create and manage only one profile for the wireless client adapter.
B. The Aironet Desktop Utility (ADU) can support only one wireless client adapter installed and used at a time.
C. The Aironet Desktop Utility (ADU) can be used to establish the association between the client adapter and the access point, manage authentication to the wireless network, and enable encryption.
D. The Aironet Desktop Utility (ADU) and the Microsoft Wireless Configuration Manager can be used at the same time to configure the wireless client adapter.
Correct Answer: BC
At which layer of the OSI model does the Spanning Tree Protocol (STP) operate at?
A. Layer 5
B. Layer 4
C. Layer 3
D. Layer 2
E. Layer 1
300-135 dumps Correct Answer: D
In computer networking a multicast address is an identifier for a group of hosts that have joined a multicast group. Multicast addressing can be used in the Link Layer (OSI Layer 2), such as Ethernet Multicast, as well as at the Internet Layer (OSI Layer3) as IPv4 or IPv6 Multicast. Which two descriptions are correct regarding multicast addressing?
A. The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a multicast application.
B. The last 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reserved value that indicates a multicast application.
C. To calculate the Layer 2 multicast address, the host maps the last 23 bits of the IP address into the last 24 bits of the MAC address. The high-order bit is set to 0.
D. The first 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E.
This is a reserved value that indicates a multicast application.
Correct Answer: CD
6000+ Exam Q&As
6000+ Free Demo
98% Pass Rate
100% Money Back Guarantee
365 Days Free Update
5 Years Working Experience
[100% Pass exam 300-135 PDF Dumps Version From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWVjNzVmpXTDBzU00
[100% Pass exam 300-206 PDF Dumps Version From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWam9uZE5CQl9jczA
What if I don’t pass the exam? How do I claim Refund?
Any exam.com user who fails the corresponding exam has 30 days from the date of purchase of 300-135 dumps exam on exam.com for a full refund. We can accept and arrange a full refund requests only if your score report or any relevant filed be confirmed.
This preparation guide is subject to change at any time without prior notice and at the sole discretion of Cisco. exam Cisco exams might include adaptive testing technology and simulation items. Cisco does not identify the format in which exams are presented. Please use this preparation guide to prepare for the exam 300-135 dumps exam, regardless of its format. To help you prepare for this exam, exam Cisco recommends that you have hands-on experience with the product and that you use the specified training resources. These training resources do not necessarily cover all topics listed in the “skills measured” section.
I believe that people want to have good prospects of career whatever industry they work in. Of course, there is no exception in the competitive IT industry. IT Professionals working in the IT area also want to have good opportunities for promotion of job and salary. A lot of IT professional know that exam 300-135 dumps exam exam tests can help you meet these aspirations. exam is a website which help you successfully pass Cisco 300-135 dumps.
exam Cisco 300-135 Dumps Certification Exam, Latest Upload Cisco 300-135 Dumps Prep Guide UP To 50% Off, We Help You Pass Troubleshooting and Maintaining Cisco IP Networks. exam 300-135 Dumps Exam Youtube Free Online Test Here:
exam Promo Code 15% Off